1. Please make sure that the current firmware is V1.1.87B05
2. Upgrade to the V2.0.0.1_16T. You can download from here
3. It is the best that you can restore to the factory default setting
Remark: If you cannot found the SMC2888W-M, please do a hard reset. Just open the casing, press and hold the reset button for 10 seconds. It will reset back to factory default setting. Default IP address is 192.168.2.2
4. Go to DOS prompt. Telnet to the SMC2888W.
5. Issue this command ==> Show ram-size
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.